HXP-5型耙式吹灰器

所屬分類：

鍋爐吹灰器

公司產品廣泛應用于火電、冶金、化工、造紙、垃圾處理、硫化床鍋爐及其它余熱鍋爐。目前公司已是哈鍋、上鍋、武鍋、杭鍋、錫鍋、川鍋、濟鍋、蘇源環保、武漢凱迪等的合格分供方。為國內各大鍋爐廠配套300MW、600MW及1000MW機組電站鍋爐項目。產品業績遍布全國二十八個省、市、自治區，并出口印度、印尼、越南、泰國、馬來西亞等東南亞國家。

產品咨詢

聯系我們

產品詳情

HXP-5型耙式吹灰器

　　HXP-5型耙式吹灰器是一種伸縮式吹灰器，主要用于吹掃電站鍋爐煙氣脫硝裝置（SCR）上，在鍋爐的鰭片管省煤器、管式空氣預熱器等部位和一些小型鍋爐的對流管束、以及某些特種鍋爐（如余熱鍋爐）煙溫不超過600°C的區段也廣泛采用。這些部位由于被吹掃面的特殊結構，使用一般的長伸縮式吹灰器或固定旋轉式吹灰器往往由于吹灰方向不合理，達不到理想的吹灰效果。使用耙式吹灰器，其吹灰管針對積灰部位按照所需的方向進行吹灰，起到了其它形式的吹灰器不能達到的吹灰效果。在結構上，它除了吹灰槍管不旋轉而且形式不同，并相應增設耙式吹灰槍管支承導向機構外，其余所有部件結構、控制方式及動作原理與HXC-5系列長伸縮式吹灰器完全相同。
　　The HXP-5 rake type soot blower is a retractable soot blower mainly used for blowing the flue gas denitrification device (SCR) of power plant boilers. It is also widely used in the finned tube economizer, tubular air preheater and other parts of the boiler, as well as in the convection tube bundle of some small boilers, as well as in the section where the flue gas temperature of some special boilers (such as waste heat boilers) does not exceed 600 ° C. Due to the special structure of the blown surface in these areas, the use of conventional long telescopic or fixed rotary soot blowers often fails to achieve the desired blowing effect due to the unreasonable blowing direction. Using a rake type soot blower, the soot blowing pipe blows the soot in the desired direction for the accumulated area, achieving a soot blowing effect that other forms of soot blowers cannot achieve. In terms of structure, except for the non rotating and different forms of the soot blowing gun barrel, and the corresponding addition of a rake type soot blowing gun barrel support and guide mechanism, all other components have the same structure, control mode, and action principle as the HXC-5 series long telescopic soot blower.

主要技術參數：
Main technical parameters:
吹灰器行程：根據合同要求
Soot blower stroke: according to contract requirements
吹灰管移動速度：根據合同要求
Movement speed of soot blowing pipe: according to contract requirements
吹灰介質：蒸汽或壓縮空氣
Soot blowing medium: steam or compressed air
吹灰壓力：～1．5MPa
Soot blowing pressure:~1.5MPa
有效吹灰距離：～1.5m
Effective soot blowing distance:~1.5m
布置區域最高煙溫：600℃
Maximum smoke temperature in the layout area: 600 ℃
噴嘴數量及口徑：根據合同要求決定
Number and diameter of nozzles: determined according to contract requirements
電動機（中國國內使用）：Y90S-4 B5型 1.1KW
　　　　　　　　　　　　1400rpm.380V.50Hz.3P
Electric motor (for domestic use in China): Y90S-4 B5 type 1.1KW
　　　　　　　　　　　　　　　　　　　1400rpm.380V.50Hz.3P
近似重量：360kg+每米行程116kg（不包括吹灰槍管的爐內部分）
Approximate weight: 360kg+116kg per meter of travel (excluding the inner part of the soot blower barrel)

主要零部件
Main components
1.跑車與電動機（減速機）
1. Sports car and electric motor (reducer)
2.吹灰器閥門（提升閥）及反法蘭
2. Soot blower valve (lift valve) and counter flange
3.梁體
3. Beam body
4.墻箱（與鍋爐接口）
4. Wall box (interface with boiler)
5.動力電纜
5. Power cable
6.爐內耙管和主管
6. Furnace rake pipe and main pipe
7.前托架（支撐吹灰槍）
7. Front bracket (supporting the soot blower)
8.內管
8. Inner tube
9.支撐管和導向管
9. Support and guide pipes
10.電氣箱與行程控制表（前、后限位開關）
10. Electrical box and travel control table (front and rear limit switches)
11.正壓密封系統及清污管道
11. Positive pressure sealing system and cleaning pipeline

上一個：

HXDJ-5型多介質伸縮式吹灰器

下一個：

國內外吹灰器配件加工

產品咨詢

產品名稱：

相關產品

HXG-5型固定旋轉式吹灰器

湖北華信機械發展有限公司專業從事各類鍋爐吹灰器、冷渣器、閥門管道系統、工業控制系統及其他輔機設備的設計開發、生產制造與檢修服務。

Hubei Huaxin Machinery Development Co., Ltd. specializes in the design, development, production, manufacturing, and maintenance services of various boiler soot blowers, slag coolers, valve piping systems, industrial control systems, and other auxiliary equipment.